The development direction of intelligent green technology in large-scale mixed station engineering

2017-02-13

The development direction of intelligent green technology in large-scale mixed station engineering. Faced with the rapid changes in the current situation, the construction of large mixing station is also facing the corresponding reform. Now, accelerate the construction of urban and rural areas, the demand of concrete machinery is also increasing, however, the concrete equipment on the market the quality is uneven in quality emerge in an endless stream. These products, there are already some products have a certain level of automation, high accuracy, mixing station, good quality, low investment and so on. But at the same time, there are some manufacturers, with low prices to attract buyers, and equipment technical parameters have remained in the traditional stage.

First of all, from the precision of equipment. The equipment of large mixing station is mainly embodied in four aspects: aggregate, cement, admixture and water. For the aggregate, its accuracy is generally controlled at about 2%, cement is about 1%, admixture is generally about 1%, and who is about 1%. As for the aggregate, the weighing is usually weighed by weighing hopper and belt scale, and the belt scale is usually accumulated, and the weighing hopper is divided into two kinds: cumulative and separate weighing. The weighing of cement and other powder can be divided into two ways: separate and cumulative weighing. Admixtures are divided into three types according to the different types of volume, mass and pulse. For water, it can also be divided into two measurement methods, namely, volume and weighing. To ensure the accuracy of the delivery of raw materials are the key to producing high-quality goods concrete, if the equipment has improved the accuracy of equipment, is undoubtedly a tiger with wings added.

Secondly, for large mixing station, the main purpose is to produce high-quality merchandise concrete. Therefore, the selection of raw materials is also particularly important. With the increasing demand for green environmental protection equipment, the selection of raw materials has also been affected. It should be processed food additives, the use of fly ash, slag, slag, carbide slag and other industrial solid waste to replace the traditional special coarse powder mill consumption. Secondly, the aggregate can also be used to make full use of resources to achieve the purpose of resource conservation.

Furthermore, in the large mixing plant equipment control, should be further reform, to achieve a comprehensive intelligence, thus liberating human. The development of the times, fully automatic equipment is the inevitable development. In order to always occupy a seat in the concrete machinery industry, the control system of human nature, intelligent indispensable.


Tel:+86 532 67731351