The detailes of the large inclination belt conveyor structure


A large inclination belt conveyor is a friction-driven machine that continuously transports material. It can be material in a certain transmission line, from the initial feeding point to the final discharge point between the formation of a material transport process. It can be carried out fragile material delivery, can also be carried into pieces of goods delivery. In addition to pure material delivery, but also with the industrial production process in the process of matching the requirements of the formation of a rhythm of the pipeline operation of transport lines. Today, let us take a closer look at its structure.

large inclination belt conveyor conveyor belt according to the principle of friction and movement, suitable for conveying the bulk density of less than 1.67 / ton / cubic meter, easy to extract the powder, granular, small pieces of low-cut materials and bags of materials, such as Coal, gravel, sand, cement, fertilizer, food and so on. large inclination belt conveyor from the conveyor belt, roller, roller and brake, drive, change, tension, loading, unloading, cleaning and other devices.

1, conveyor belt. Commonly used rubber belt and plastic belt with two kinds. Rubber tape for working environment temperature -15-40 ¡æ. Material temperature does not exceed 50 ¡æ. The inclination of the pellets is 12 ¡ã to 24 ¡ã. For large angle conveyor belt available rubber band. Plastic belt with oil, acid, alkali and other advantages, but for the climate of poor adaptability, easy to slip and aging. Bandwidth is the main technical parameter of large inclination belt conveyor.

2, roller. Single drum, double drum and multi roller. Slotted roller, flat idler, aligning roller, buffer roller. The grooved roller supports the bearing branch to convey the particulate material; the aligning roller is used to adjust the lateral position of the belt to avoid deviation; the cushion roller is mounted on the receiving material to reduce the impact of the material on the belt.

3, roller. Sub-drive roller and re-direction roller. Driving the drum is the main part of the transmission power, sub-single drum, double drum and multi-drum and so on.

4, tension device. Its role is to make the conveyor belt to the necessary tension, so as not to slip on the drive roller, and the conveyor belt between the roller to ensure that the deflection within the specified range.

Tel:+86 532 67731351