How to check the quality of the HZN concrete mixing plant

2017-06-02

HZN concrete mixing plant in the use of infrastructure in a wide range of users of the HZN concrete mixing plant is limited to how to understand the quality of the HZN concrete mixing plant is good or bad, not very understanding, the following, the author with you understand.
The main components of the HZN concrete mixing plant that a few, so as long as these major components of no quality problems, then the concrete mixing plant is not much of a quality problem.
1. If the mixer is self-falling agitator, its discharge ring does not exceed 1% of the diameter of the inlet, and the quality of the steel mesh on the blender screen and the mesh Reasonable size and check the installation accuracy of the screen;
2. The operation of the transmission system should be flexible, no abnormal sound;
3. Belt conveyor, bucket elevator and cantilever shovel and other transmission should be smooth, flexible operation, the brake can be high, no abnormal noise, no card chain;
4. Check the measurement system is also very important, to check the measurement system sensitivity and accuracy;
5. To reduce the machine to raise the temperature should also pay attention to, to achieve the temperature on the certificate;
6. Measure the bucket into the material to be smooth, there is no accumulation of materials, such as material;
7. safety valve can not appear leak phenomenon;
8. Quality of cement tank qualified;
9. The matching line installation should be reasonable, the equipment should be installed correctly.
Tel:+86 532 67731351