Debugging Method of Concrete Mixing Plant


Concrete mixing plant is the cement, aggregate and water mixed and mixed into a concrete mixture of mechanical, concrete mixing plant debugging problem, the use of concrete mixing plant in the process is very critical, a direct impact on the concrete mixing plant Whether the equipment can run normally. Today, the construction machinery to focus on the concrete mixing plant on the debugging problem.

1, concrete mixing plant of the various settings to be reasonable. Power supply voltage: the additional voltage of 380 volts, the error is ¡À 10%; motor and electrical components of the wiring can be reliable, the distribution box shell must be a reliable grounding. Power supply zero line is necessary to be delivered to the distribution box on the wiring board N, all pipelines should be properly placed to prevent the operation crushed into the formation of trouble.

2, regular inspection items. Regular inspection of the concrete mixing plant and the smoothing of the smooth parts of the smooth oil can be sufficient; to regularly check the forced mixer mixer mixing motor, two axle rotation direction should be consistent with the direction of signs, such as the direction is wrong, should change the power wiring.

3, launched discharge organization, unloading door opening and closing should be accurate in place. Start the pump hanging water, the water supply system should work; according to the required ratio of concrete to determine the amount of water supply, and conditioning the moment relay to the corresponding water supply time. Start mixing motor work.
Tel:+86 532 67731351