Maintenance method of fuel tank in concrete batching plant

2018-01-16

Concrete batching plant operating power, in addition to a strong power, of course, is inseparable from the strong operation of the fuel generator, concrete batching plant tank structure also need to do a comprehensive understanding, whether in use or troubleshooting, etc., will have a very good Help, but also in a very good maintenance and care, the following will give you a briefing on the concrete mixing station fuel tank parts.

Concrete batching plant in the middle of the tank has a baffle, the tank of the suction pipe and the return pipe separate, so that oil can only be planned by the pipeline to walk, it is more conducive to oil cooling, but also to avoid oil Appear in the bubble. In the side of the tank there is a fuel gauge, can easily view the oil, you can also see the temperature inside the tank, the tank has an air filter above, you can join the filtered hydraulic oil, can be connected with the air, But also to prevent the tank from entering the dust, the bottom of the tank there is a drain plug, you can drain or clean the tank when the remaining oil inside the tank. Liquid level gauge can not only be used to view the height of the oil can also see the emulsion of oil, etc., when working in the concrete mixing station when the oil level can not be lower than the middle of the scale. It is best not recommended below the level The thick black line at the top of the meter. Oil filter filter accuracy of 100, when the pointer reaches the red area of the vacuum meter, it should be timely replacement filter.

text from: talentedsky concrete batching plant

Tel:+86 532 67731351