Analysis of Suddenly Stopping Work of Concrete Mixing Plant

2018-01-29

Concrete mixing plant suddenly stopped working, first of all, taking into account the serious overloading, followed by stirring blades or side vanes and the inner wall of the tank has a large foreign body, then the motor drive belt is too loose, concrete mixer shaft over the normal workload, will make Mixing shaft rotation is slow, if the load is too large, it will cause the stirring shaft stall. This can also cause the mixer shaft to stop rotating or rotate slowly. Mixing blades or side vanes and the tank wall between the larger foreign body can also cause stirring shaft stalls, the reason the foreign body can be stored, is due to mixing concrete mixer blades or side vanes and tank wall caused by excessive clearance. Concrete mixer motor drive belt too loose can also cause concrete mixer mixing shaft rotation is slow or stop turning, the motor drive belt is too loose, resulting in insufficient power transmission. So how do we solve the concrete mixing plant to stop turning, mixing concrete mixer caused by overload shaft stalling, just adjust the feed rate, unload excess material, reduce the stirring shaft rotation load can be. When the side vanes and the inner wall are stuck with materials, there will be sharp and jarring friction sound before the stirring shaft stops. In this case, stop the machine immediately and remove the foreign objects manually to readjust the mixing blades or side vanes of the concrete mixer The gap between the tank wall. Concrete mixer motor drive belt is too loose, just stop adjusting concrete mixer motor drive belt tension can be.

article from:concrete mixing plant

Tel:+86 532 67731351