Aggregate Batching Machine Concrete Batching Machine Spare Part for Concrete Batching Plant
Concrete batching machine is also known as aggregate batching machine, which is used for concrete or asphalt batching (mixing) plant to store and measure all kinds of sand and gravel aggregate. According to the pre-set formula, the aggregates are conveyed into the concrete mixer with cement, fly ash, mineral power, additives and water, which are mixing to form concrete.
The PL series concrete batching machine is the automatic batching equipment equipped on concrete batching plant. It can automatically complete the batching procedure of sand, stone, cement and other materials according to the requirement of concrete proportion.
This series of concrete batching machine is suitable for different workplaces. It is composed of storage hopper, weighing system, feeding system and electric control system.
According to different weighing type, there are usually two types of concrete batching machine: cumulative weighing and separate weighing concrete batching machine.
The concrete batching machine has these features:
It has many different structural forms according to the end-user’s demand, and has flexible combination, high weighing precision, easy operation and high degree of automation properties.
The concrete batching machine can be arranged in two parts to facilitate the loading of various materials.
According to the proportion of concrete set by the end user, the concrete batching machine can automatically complete the batching of various materials.
The concrete batching machine can be combined with the corresponding concrete batching plant, which is convenient and practical.
1. When starting the concrete batching machine, the weighing hopper should be empty. Otherwise, we need to empty the weighing hopper by manual discharge. If the display is not 0, you can press the reset button to make it appear as 0.
2. When the concrete batching machine cannot work normally, you can turn off the power and restart.
3. The first batch weighing process is an automatic drop correction program. Each kind of material is divided into two parts to meet the weighing requirements.
4. Avoid that the weighing hopper being blocked by the material.
5. Before starting the machine, please check whether there are loose ends and loose components. If there is, please connect them firmly and no sundries should be put in the hopper.